Resale flat inspection guide

Top 5 Resale Flat Wall Issues to Check Before Painting

Older flats carry years of paint, stains and old repairs. Painting straight over them is why fresh paint peels or stains return. Check these five first.

  • Top 5Issues to check
  • 30-secondSelf-tests
  • 5-yearPainting warranty
Bedroom furniture covered and sealed before a ceiling repaint in a Singapore resale flat

Quick answer

What to check before you paint

In resale flats, new paint usually fails because of what is underneath: weak old layers, oil or smoke stains, damp from the bathroom next door, hollow patches and old mould. Find these, fix them, seal, then repaint.

The top 5

The five issues we see most

For each one: what it looks like, why it happens, a quick test you can do yourself, and the right fix.

01

Old paint peeling in sheets

New paint lifts and takes old layers with it.
  • Why: many old coats with weak grip on the plaster
  • Test: press tape firmly and pull; paint on the tape means it must be scraped
  • Fix: scrape loose layers, sand, seal, then paint
02

Stains that bleed through

Yellow or brown marks come back through fresh paint.
  • Why: cooking oil, incense or smoke soaked into the wall
  • Test: wipe with a damp cloth; yellow residue means stains are in the wall
  • Fix: clean, then a stain-blocking primer
03

Damp wall beside the toilet

Peeling or dark patches low on the wall next to a bathroom.
  • Why: worn bathroom waterproofing lets water creep into the next wall
  • Test: check if it worsens after showers
  • Fix: fix the waterproofing first, dry, then repaint
04

Hollow or patchy plaster

Uneven patches where old wiring or pipes were moved.
  • Why: old repairs that never bonded fully
  • Test: tap with a knuckle; a hollow sound means loose plaster
  • Fix: cut out and re-plaster before painting
05

Mould that comes back

Black spots return within months of repainting.
  • Why: mould painted over instead of removed
  • Test: look behind wardrobes and in corners; a musty smell is a clue
  • Fix: treat and remove mould, then anti-mould paint

Our order of work

How we prepare the wall

  1. 1

    Inspect every room

    We look for peeling, stains, damp, hollow spots and mould before quoting.

  2. 2

    Prepare the surface

    Loose paint is scraped, cracks filled and mould treated.

  3. 3

    Seal and prime

    Sealer on every wall, plus stain-blocking primer where needed.

  4. 4

    Paint

    Two coats, with furniture covered and the home left clean.

Keep reading

Related guides

Powered by Pico X Health Technology

Most painters cover walls. We engineer indoor health.

Ordinary contractors paint over damp plaster and hidden mould, so the finish peels and the problem comes back. Pico X Painting is the painting arm of Pico X Health Technology: we check, treat and seal the surface before any colour goes on.

  • NEA-listedEnvironmental health service
  • bizSAFE Level 3Workplace safety certified
  • Asahi Lifecare ร— A*STARResearch & development partner
  • CleanTech Park lab500+ Singapore home test sites
  1. Check the wall first

    Every job starts with a look for damp, cracks and hidden mould, using the same moisture-first approach as Pico X Mould Removal.

  2. Safer coatings for the people inside

    Low-VOC and zero-VOC paints, anti-mould sealers and breathable mineral limewash, chosen for bedrooms, nurseries and seniors' rooms.

  3. A real company behind your warranty

    Your warranty sits with Pico X Health Technology Pte Ltd, not a subcontractor, with a Pico X supervisor looking after your job.

On this service

  • Wall checked before any repaint
  • Sealer included on every job
  • 5-year warranty on full-unit painting

Questions

Common questions

Why does paint peel in my resale flat?
Usually because new paint was put over weak old layers or a damp wall. Loose paint must be scraped and the wall sealed first.
Can you paint over old stains?
Not with ordinary paint. Oil and smoke stains bleed through, so the wall is cleaned and given a stain-blocking primer first.
Should I fix the toilet waterproofing before painting?
Yes. If the wall beside a bathroom is damp, repainting will fail until the water stops.
How much does it cost to repaint a resale HDB?
See the instant price on our quote site. A 4-room HDB starts from $950, with sealer and a 5-year warranty.

Next step

Not sure which one your wall has?

Send us a photo on WhatsApp for a quick read, or see your painting price on the quote site.

Help
Customer Service
Available 9:00 - 23:00
Customer Service

๐Ÿ“š This is the Support Team. We're here to help! Our response will be slower after 6pm.

19:58
Whatsapp

Part of the Pico X Health network

Painting built on environmental health science. Pico X Painting is the painting arm of Pico X Health Technology: NEA-listed, bizSAFE Level 3 and research & development partner Asahi Lifecare ร— A*STAR, backed by Pico X Health Research (lab at CleanTech Park, 500+ Singapore home test sites).