BTO key collection guide

Top 5 New BTO Wall Issues to Check Before Painting

A brand-new flat can still have wall problems. Fresh concrete is still drying, panels are still settling and the developer's coat is thin. Check these five before your first repaint so the new paint lasts.

  • Top 5Issues to check
  • 30-secondSelf-tests
  • 5-yearPainting warranty
Pico X painter rolling a fresh coat on a bedroom ceiling in a Singapore flat

Quick answer

What to check before you paint

Most new BTO wall problems come from moisture still drying out of fresh concrete, small settlement cracks along panel joints, and a powdery base coat. Check for damp, cracks and chalkiness first, report defects during the defects liability period, then seal and prime before painting.

The top 5

The five issues we see most

For each one: what it looks like, why it happens, a quick test you can do yourself, and the right fix.

01

Bubbling paint on new walls

Small blisters or soft patches appear weeks after painting.
  • Why: moisture still drying out of new concrete gets trapped under the paint
  • Test: cling film taped to the wall for a day; droplets behind it mean the wall is still wet
  • Fix: let it dry, then use a breathable sealer and primer
02

Hairline cracks along joints

Thin straight cracks along wall joints, corners and above doors.
  • Why: the building settles and panels move with heat in the first year or two
  • Test: check if the crack follows a straight joint line; note it for the defects list
  • Fix: fill with flexible filler, prime, then paint
03

Chalky, powdery walls

Rub the wall and your hand comes away white.
  • Why: a thin, porous base coat with nothing to bind it
  • Test: press tape on the wall and peel; powder on the tape means it needs sealing
  • Fix: a penetrating sealer before any new paint
04

White powder (efflorescence)

Fluffy white salt on walls or corridor-facing surfaces.
  • Why: water moving out of new concrete carries salts to the surface
  • Test: brush it dry; if it comes back, moisture is still moving
  • Fix: brush off dry, let the wall dry, breathable primer
05

Damp around aircon boxes

Stains or mould near aircon trunking or false ceilings.
  • Why: cold pipes sweat inside closed boxing
  • Test: check after long aircon use; damp that comes and goes is condensation
  • Fix: insulate the pipe, dry, then anti-mould paint

Our order of work

How we prepare the wall

  1. 1

    Walk through and photograph

    We note cracks, damp and chalky areas so you can also report defects to HDB in time.

  2. 2

    Check for moisture

    Fresh walls are checked before we seal, so paint is not trapped over damp.

  3. 3

    Fill and seal

    Cracks are filled and the whole wall gets a sealer so the topcoat bonds.

  4. 4

    Paint

    Two coats of your chosen paint, usually in one working day for a standard BTO.

Powered by Pico X Health Technology

Most painters cover walls. We engineer indoor health.

Ordinary contractors paint over damp plaster and hidden mould, so the finish peels and the problem comes back. Pico X Painting is the painting arm of Pico X Health Technology: we check, treat and seal the surface before any colour goes on.

  • NEA-listedEnvironmental health service
  • bizSAFE Level 3Workplace safety certified
  • Asahi Lifecare ร— A*STARResearch & development partner
  • CleanTech Park lab500+ Singapore home test sites
  1. Check the wall first

    Every job starts with a look for damp, cracks and hidden mould, using the same moisture-first approach as Pico X Mould Removal.

  2. Safer coatings for the people inside

    Low-VOC and zero-VOC paints, anti-mould sealers and breathable mineral limewash, chosen for bedrooms, nurseries and seniors' rooms.

  3. A real company behind your warranty

    Your warranty sits with Pico X Health Technology Pte Ltd, not a subcontractor, with a Pico X supervisor looking after your job.

On this service

  • Wall checked before any repaint
  • Sealer included on every job
  • 5-year warranty on full-unit painting

Questions

Common questions

How long should I wait before painting a new BTO?
If the walls feel dry and show no damp or white powder, you can paint at key collection. If you see bubbling or salts, let the walls dry first and use a breathable sealer.
Are hairline cracks in a new BTO normal?
Fine straight cracks along joints are common as a new block settles. Report them during the defects period; wide, growing or wet cracks need inspection.
Do I need a sealer on a new BTO wall?
Yes. New walls are often porous and powdery. A sealer helps paint bond and is included in every Pico X painting job.
How much does it cost to paint a new BTO?
See the instant price for your flat type on our quote site. HDB painting starts from $765 for a 3-room flat.

Next step

Not sure which one your wall has?

Send us a photo on WhatsApp for a quick read, or see your painting price on the quote site.

Help
Customer Service
Available 9:00 - 23:00
Customer Service

๐Ÿ“š This is the Support Team. We're here to help! Our response will be slower after 6pm.

19:58
Whatsapp

Part of the Pico X Health network

Painting built on environmental health science. Pico X Painting is the painting arm of Pico X Health Technology: NEA-listed, bizSAFE Level 3 and research & development partner Asahi Lifecare ร— A*STAR, backed by Pico X Health Research (lab at CleanTech Park, 500+ Singapore home test sites).